Sony MVS-6000 - Clip Output; Recording and Playback of Ancillary Data

293Frame Memory Clip Operations
Chapter 7 Frame Memory
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8,
LPT9
This changes the folder name.
Deleting a folder
1 In the Frame Memory >Folder menu, select the folder with the arrow keys
or by turning the knobs.
To select all folders, select [All].
2 Press [Delete].
A confirmation message appears.
3 To carry out the deletion select [Yes], and to cancel the deletion select
[No].
Note
It is not possible to delete the default folder (named “Default”).
Clip Output
As for still image operation, you can use the reposition and lock functions.
For details of the operation, see “Image Output” (page 276).
Recording and Playback of Ancillary Data
Preparations
To record ancillary data, it is first necessary in the Setup menu to select “save
with ancillary data” as the frame memory saving mode (see “Saving a Frame
Memory Clip With Ancillary Data” in Chapter 18 (Volume 3).)
Knob Parameter Adjustment Setting values
1 No. Folder selection 1 to 12
2 Num Number of files to select
consecutively from selected file
1 to 12