269Still Image Operations
Chapter 7 Frame Memory
3
To link the masks on frame memory source buses 1 and 2, press [Mask
Link], turning it on.
Recalling Still Images
You can recall an image file saved in memory, and allocate to any of the FM1
to FM8 outputs.
Recalling a still image
To recall a still image file saved in memory using the thumbnails, and assign it
to an FM output, use the following procedure.
1
In the Frame Memory menu, select VF1 ‘Still’ and HF1 ‘Recall.’
The Recall menu appears.
• When [Pair] is on, only pair files (pairs of main file and sub file) are
displayed.
• When [Pair] is off, both single files and pair files appear.
Main file
Sub file
To Next Page
Loading...
