218
Wipe Snapshots
Chapter 5 Wipes
Wipe Snapshots
You can snapshot and save a wipe pattern together with the current settings of
its modifiers and pattern limit in a dedicated register for recall when required.
There are 10 wipe snapshot registers on each M/E bank and the PGM/PST
bank.
Use the menu to save and recall wipe snapshots.
Wipe Snapshot Operations With the Menus
Menus used
As an example, when operating on M/E-1, select M/E-1 >Wipe >Wipe
Snapshot.
The Wipe Snapshot menu appears.
Button displays
In setup you can select whether the memory recall buttons show the pattern
number or register name.
See “Operation Settings (Operation Menu)” in Chapter 19 (Volume 3).
Memory recall buttons
To Next Page
Loading...
