341Color Corrector Functions
Chapter 9 Color Corrector
You can mask a part of the region to be corrected.
Applying secondary color correction
1
In the CCR menu, select VF1 ‘CCR1’ and HF3 ‘Secondary CCR.’
The Secondary CCR menu appears.
2
In the <Secondary CCR> group, press [Secondary CCR], turning it on.
3
In the <Secondary CCR Adjust> group, select the color for which you
want to make the setting.
4
Adjust the following parameters.
To return the parameter settings to their default values
In the <Secondary CCR> group press [Unity].
Masking a part of the secondary color correction
In the <Secondary Mask> group, press [Mask1] or [Mask2], turning it on, then
carry out the same operation as described under “Masking a part of the primary
color correction” (page 338).
RGB Clip Operations
For each of the R, G, and B signals, you can make dark clip and white clip
adjustments.
Making RGB clip adjustments
1
In the CCR menu, press VF1 ‘CCR1’ and HF4 ‘RGB Clip.’
The RGB Clip menu appears.
2
In the <RGB Clip> group, press [RGB Clip], turning it on.
Knob Parameter Adjustment Setting values
1 Luminance Luminance –100.00 to +100.00
2 Saturation Saturation 0.00 to 200.00
3 Hue Delay Hue delay –180.00 to +180.00
To Next Page
Loading...
