144
Overview
Chapter 4 Keys
Edge type and key fill/key source position
Note
For key 3 and key 4, it is not possible to set key drop to On.
Drop
border
This applies a border below and to the right
for example, of the key. You can adjust the
border width, position, and density.
Shadow This applies a shadow below and to the right
for example, of the key. You can adjust the
shadow width, position, and density.
Outline This uses the outline of the original key as
the key. You can adjust the width and
density of the outline. You can also enable
the separate edge function, and adjust the
top, bottom, left, and right outline widths
separately.
Emboss This applies an embossing effect to the
outline of the key. You can adjust the width
and position of the embossing, and the
density. You can adjust the density
separately for key fill and key edge. When
embossing is on, the Fine Key and zabton
functions go off.
–
Soft
edge
This softens the edge of the key. –
Zabton This inserts a translucent pattern behind a
key. You can adjust the pattern size,
softness, density and color.
–
Name Effect Image
To Next Page
Loading...
