166
Key Setting Operations Using Menus
Chapter 4 Keys
• When turning [Angle] on in the <Rotation> group and inclining the
pattern
a) See page 208.
• When turning [Speed] on in the <Rotation> group and rotating the
pattern at a constant speed
a) See page 209.
6
To interchange color 1 and color 2, press [Color Invert], turning it on.
Applying the zabton effects
Notes
• For key 3 and key 4, the zabton effect is not available.
• For key 1 or key 2, it is not possible to have zabton and [Fine Key] on
simultaneously.
1
In the Edge menu, press [Zabton], turning it on.
2
Adjust the following parameters.
Note
If in the pattern selection described below you select “Mask Pattern,” and
“Box” for the mask, the “Size” parameter here cannot be adjusted. Set
“Size” in the Main Mask menu.
3
To adjust the pattern and color, press [Zabton Adjust].
The Zabton Adjust menu appears.
4
In the <Zabton Pattern> group, select the pattern.
Knob Parameter Adjustment Setting values
1 Angle Angle of pattern rotation
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Speed Rotation rate of pattern
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Pattern edge softness 0.00 to 100.00
3 Density Density 0.00 to 100.00
To Next Page
Loading...
