231Overview
Chapter 6 DME Wipes
Relation to processed keys
When using the DME for a processed key, if you select a DME wipe, an
available DME is automatically allocated to the DME wipe. If all of the DME
channels are in use, then it is not possible to select a DME wipe.
If in a Setup menu a setting has been made for DME allocation, that Setup
menu setting takes precedence (see “Setting the assignments of DME channels
to use on the individual M/E banks” in Chapter 20 (Volume 3).
Relation to resizer
It is not possible to select a DME wipe for a key having the resizer enabled.
Number of DME wipes that can be used simultaneously on a
single M/E bank
DME wipes can be used in five places, including the four independent key
transitions.
It is not possible to use two or more of these places simultaneously.
To Next Page
Loading...
