261Still Image Operations
Chapter 7 Frame Memory
b Display of available image capacity
This shows the remaining number of frames. When no more frames can be
stored, in pair mode “1” or “0” appears in red, and in single mode “0” appears
in red.
c Target FM selection buttons
Press one of these to select which of the selected outputs (FM1 and FM2 in the
example shown) the operation applies to.
The following information appears on the button.
Status display
File name (e.g. image001) and thumbnail: when a file is output
Black: when a black signal is output
Through: when the input image is output
Freeze: when a freeze is output
Composite: when a composite image is processed
Record: when continuously capturing images (record)
Still/duration display
When a still image is selected, “Still” is shown. When a clip is selected, a
duration indication such as “00:00:10” is shown.
Reposition/Lock status display
This shows “R” when the reposition function (see page 276) is on, and shows
“L” when the lock function (see page 277) is on.
Status display
Still/duration display
Reposition/Lock status display
The border color shows the status as follows:
Blue: selected as the reference channel
Amber: selected, but not the reference channel
Black: not selected
Ancillary data-attached clip display
To Next Page
Loading...
