295Frame Memory Clip Operations
Chapter 7 Frame Memory
• In the case of 480i or 59.94, noise may occur at the beginning of playing back
a clip. This can be avoided by making the first nine or more frames of the clip
soundless.
• When you play back the recorded embedded audio, depending on the device
to be used, noises are produced at the playback start point and end point. For
details of devices that are used for playback, contact your Sony service or
sales representative.
1
In the Frame Memory menu, select VF2 “Clip”, HF5 “Ancillary Enable.”
2
Select the frame memory folder and file to be played back.
3
Set the [Ancillary Enable] button to On.
To Next Page
Loading...
