322
Misc Menu Operations
Chapter 8 Color Backgrounds, Copy and Swap, and Other Settings
Note
When a clip transition is selected as the transition type, it is not possible to
change the transition rate in this menu.
To set the independent key transition rate
1
In the <M/E-1 Transition Rate> group of the Misc >Transition menu, press
[Key].
To set the key On direction or Off direction independently, press Key(On)
or Key(Off).
2
Turn the knobs to set the number of frames.
To set the fade-to-black transition rate in the Transition menu
Note
This function is not available with the CCP-9000.
1
In the Misc >Transition menu, press [FTB].
2
Turn the knob to set the number of frames.
Knob Parameter Adjustment Setting values
1 Transition Rate Transition rate 0 to 999 (frames)
Knob Parameter Adjustment Setting values
1 Key1 Trans Rate Key 1 transition rate 0 to 999 (frames)
2 Key2 Trans Rate Key 2 transition rate 0 to 999 (frames)
3 Key3 Trans Rate Key 3 transition rate 0 to 999 (frames)
4 Key4 Trans Rate Key 4 transition rate 0 to 999 (frames)
Knob Parameter Adjustment Setting values
1 Transition Rate Transition rate 0 to 999 (frames)
To Next Page
Loading...
