Chapter 9 Color Corrector
346
Color Corrector Functions
4
Adjust the parameters so that the color you want to change is included
within the sample mark.
5
In the <Auto> group, press [Auto Start], to adjust the key automatically.
Note
This automatic adjustment does not carry out key gain adjustment. If
required, adjust the key gain as shown in step 6.
6
Press [Key Adjust], and adjust the following parameters.
7
Press [Window], turning it on, to adjust the key detection range for spot
color adjustment.
8
In the <Spot CCR> group, press [Spot CCR] to display the parameters, and
adjust the replacement color.
.
To return the parameters to their default settings
In the <Spot CCR> group, press [Unity].
Knob Parameter Adjustment Setting values
1 Position H Horizontal position –100.00 to +100.00
2 Position V Vertical position –100.00 to +100.00
3 Size Size 1.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance –7.31 to +109.59
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
4 Gain Key gain –100.00 to +100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To Next Page
Loading...
