57Names and Functions of Parts of the Control Panel
Chapter 2 Menus and Control Panel
Lit green: DME channel currently
assigned to the monitor output
l OVERRIDE button
To select a DME channel already allocated
to another keyer or transition to the
currently selected keyer (or transition), hold
down this button, and press the DME
channel selection button.
m TRACE button
When a DME channel is already allocated
to another keyer or transition, hold down
this button, and press the corresponding
DME channel selection button, to switch to
the state in which the keyer (or transition) to
which the DME channel is allocated is
currently selected.
n AUTO DELEG (auto delegation)
button
When this button is on, the key delegation
selection state of the key control block is
linked to the next transition selection state
of the transition control block.
o RESIZER button
Enables or disables resizer.
For details on resizer, see page 186.
To Next Page
Loading...
