86
Basic Menu Operations
Chapter 2 Menus and Control Panel
MS-DOS does not distinguish case in
filenames, and therefore you are
recommended to enter filenames in capital
letters.
f Shift button
This selects the characters on the shift side
of the keys. The shift is released when you
enter a character.
g Space button
This enters a space character.
h Clear button
This clears all of the characters in the input
string.
i Del button
This clears the character immediately after
the cursor in the input string.
j Left button
This moves the cursor one character to the
left in the input string.
k Right button
This moves the cursor one character to the
right in the input string.
l Enter button
This sets the input string as a parameter
value, and closes the keyboard window if
the value has been entered correctly. If the
value has not been entered correctly, the
display color changes.
m Line feed button
After pressing the Shift button, press this
button to feed a line. The input string shows
“
|”.
Function of the top menu window
1 Top menu selection buttons
2 Input display
3 Numeric entry section
6 Close button
4 Clear button
5 Enter button
7 Shut down button
8 Add Favorite button
To Next Page
Loading...
