To playback quickly or slowly with sound (DVD only)
You can listen to dialog or strand while playing the current scene quickly or slowly.
To playback quickly, press _ during playback.
To playback slowly, press || PAUSE, then press I_ during playback.
Press _ PLAY to return to normal playback,
Notes
• You canru)l sel virtual surround effects wl'dle perforn'lirJg playback quickly or slowly vvitl'_
sound. In addition, you cannot perform playback quickly or slowly with sound when a virtual
surround effect is set.
• You calmol perform DTS audio output duriug playback quickly or slowly with sound.
In addition, you cannot perform playback quickly or slowly with sound when DTS audio
outpul is set.
To Resume playback for the current disc (Resume Play)
The DVD player remembers the point where you stopped the disc even if the DVD
player enters standby mode by pressing I/(_).
While playing a disc, press • STOP to stop playback.
Press [2::> PLAY.
The DVD player starts playback from the point where you stopped the disc in
Step 1.
Tip
• Tu begin playback from the top of the disc, press • STOP twice then press [2>- PLAY.
Notes on playing DTS* sound tracks on a CD
• Whenph@ngDTS_encodedCDs, excessivenoisewillbehe:u'dfromthe:malogstereojacks.
Tu axoid possible damage tuthe audio system, the consumer shouhl take proper prec:mtions
when the analog stereo jacks of the DVD player are connected to an amplification system. To
ei3ioy DTS Digital Surround 'j:'lplayback, an external 5.I-channel decoder system must be
connected to the digital jack of the DVD player.
• Set the sound tn "Stereo" using the AUDIO button when you play DTS sound tracks on a CD
(page 74).
• Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT/COAXIAL) jack even if "DTS" is set to "Off" in "AUDIO SETUP"
menu (page 54), and may affect your ears nrcause your speakers to be damaged.
Notes on playing DVDs with a DTS sound track
• DTS :mdi° sigu:ds are °utput nnly thr°ugh the DIGITAL AUDIO OUT (COAXIAL) jack"
• When you play a DVD with DTS sound tracks, set "DTS" to "On" in "AUDIO SETUP"
menu (page 54).
• If you connect the player to audio equipment without a DTS decoder, do not set "DTS" to
"On" in "AUDIO SETUP" menu (page 54). A loud noise may come out from the speakers.
affecting your ears or causing the speakers to be damaged.
: "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems. Inc.
O
I'D
Playing discs 37 us
To Next Page
Loading...
