If you connect the CONTROL S
IN
jack on another component
to the CTRL S OUT jack on this
receiver
Example
Using
the
CONTROL
S
Control
System
If
you have a
CONTROL
S-compatihle Sony
TV, satellite lUner, monitor,
DVD
player
or
VCR,
use
a
CONTROL
Sconnecting cord (not
supplied) to connect the
CTRL
S
IN
(for
TV,
satellite tuner,
or
monitor) or
CTRL
S
OUT
(for
VCR,
etc.) jack
on
the
receiver to the
appropriate
CONTROL
S
jack
on
the
respective component. Refer
to
the operating
instructions supplied with your TV, satcllite
tuner, monitor, VCR, etc., for delails.
TV VCR Tuner
OUT
If you connect the CONTROL S
OUT jack on another
component to the CTRL S
IN
jack on this receiver
Example
OUT
TV.
VCR, tuner,
monitor, etc.
~
~
~
.:;._'
>---
m
~
~ifi
Remote
The remote sensor
on
the
CONTROL
S
OUT
component receives rcmole codes lhc
same
way
as
the
remote sensor
on
this receiver. This
is
useful
if
you have placed this receiver in a
rack, etc.
114
GB
Remote
The remOle sensor
on
this receiver receives
remote codes the
same
way
as
the remote
sensor
on
the
CONTROL
S
IN
component.
This is useful
if
you place the other component
away from this receiver.
To Next Page
Loading...
