Sony STR-DA5300ES - 7: Operating the Receiver Using the GUI (Graphical User Interface)

Press and hold DISPLAY, then press
MUTING and
6) at the same time.
2
~3
'1t-tt-5
AMP
~~(!jHt-- MENU
Displaying the GUI menu on the
TV screen
By using thc GUlmcnu, you can make various
settings and adjustments.
using the GUI (Graphical User
Interface)
7: Operating the receiver •
1 Connect a TV monitor to this
receiver.
Refer to "3: Connecting the monitor"
(page 20).
2 Turn on the receiver and the TV.
3 Press AMP to enable receiver
operation.
To switch the command mode
of the RM-AAU016 remote
8808
~)""T£JI ..... O:'v""'"
MUTING •
1 Press 1/6 while pressing RM SET UP.
The RM SET UP button t1ashes.
2 Press 1 or 2 while the RM SET UP
button is flashing.
When you press I, the command mode is
set to
AV SYSTEM I. When you press 2,
the command mode is set to AV SYSTEM
2.
3 Press ENTER when the RM SET UP
button lights
up.
The RM SET UP button Ilashes twice, then
the
command mode setting process is
completed.
Tip
When you press RM SET UP. use a thin wire. such
as a paper clip.
continued'- _