Sony STR-DA5300ES - Tuner Operations; Listening to FM;AM Radio

Tuner Operations
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
(page 38).
Tip
The tuning scale for direct tuning is shown below.
• FM band
J 00 kHz
• AM band 10 kH7.*
"The AM tuning scale can be changed (page 144).
Automatic tuning
82
GB
1 Make sure that the AMP button
is
lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window
of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 41).
2 Press +'+ repeatedly to select
"FM" or "AM," then press
<:B or
••
The FM or AM menu list appears on the
TV screen.
3 Press +'+ to select "Auto
Tuning," then press
<:B.
4 Press +,+.
Press +to scan from low to high, press +
to scan from high to low.
The receiver stops scanning whenever a
slalion is received.
In case of poor FM stereo
reception
1 Press OPTIONS.
2 Press
+/+ to select "FM Mode," then
press
8).
3 Press +/+ to select "MONO," then
press
8).