Switching
between
digital
and
analog
audio
(INPUT
MODE)
When you connect components
to
bOlh
digital
and
analog audio input jacks on the receiver,
you
can
fix
the
audio input mode to either
of
them, or switch from one
to
the other,
depending
on
the
type
of
material you inlend
to
watch.
1 Press the input button.
You
can
also
use
INPUT
SELECTOR on
the
receiver.
2 Press AMP.
3 Press INPUT MODE repeatedly
to select the audio input mode.
The selected audio input mode appears
on
the
TV
screen.
Audio input modes
•
Aula
Gives
priority
to digital audio signals when
there
are
both digital
and
analog
connections.
If
there arc no digital audio signals, analog
audio signals
are
selected.
• Analog
Specifies
the
analog audio signals input
to
the
AUDIO
IN
(UR)
jacks.
Notes
•
Some
audio input modes may not be set up
depending
on the input.
• When either HDMI input. satellite tuner
or
DIGITAL
MEDIA
PORT adapter
is
selected,
"------" appears on the display.
and
you
cannot
select
other
modes. Sclect an input
mode
other
than
the HDMI input, satellite tuner and DIGITAL
MEDIA
PORT
adapter then set the audio input
mode.
• When
"2ch
Analog
Direct" is being used.
or
the
multi-channel input is selected, audio input
is
set to
"Analog."
You
cannot
select
other
modes.
99
G8
•
o
~
III
.,
o
"t:l
III
ii1
-
0'
:::J
111
To Next Page
Loading...
