Amplifier
Dgerations
i
//
"'
"X/):'
J}/
:m;/
Settings
for
the
audio
(Audio
settings
menu)
You
can use the Audio settings menu to make
settings for the audio to suit
your
preference.
Select
"Audio"
in
the Settings menu. For
details on adjusting the parameters, see "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page
41
).
A.-dio
settingS
m~nu
parameters
•
AN
Sync
(Synchronizes audio and video
output)
Lets you delay the output
of
audio to mini mize
the time
gap
between audio output and visual
display.
You
can adjust the delay from 0 ms to
300
ms in
10
ms steps.
Notes
• This function is useful when you use a large LCD
or
plasma monitor
or
a projector.
• This function
does
not work
in
the following cases.
- The multi-channel input
is
selected.
- "2ch Analog Direct"
is
being used.
• Dual Mono
(Digital broadcast language
selection)
Lets you select the language you want to listen
to during a digital broadcast.
This
feature only
functions for Dolby Digital sources.
•
MAIN/SUB
Sound
of
the main language will be output
through the front left speaker, and
sound
of
the sub language will be output through the
front right
speaker
simultaneously.
•
MAIN
Sound
of
the main language will be output.
•
SUB
Sound
of
the sub language will be output.
•
MAIN+SUB
Mixed sound
of
both the main and sub
languages will be output.
• Decode Priority
(Digital audio input decoding
priority)
Lets you specify the input mode for the digital
signal input to the DIGITAL
IN
jacks
or
HDMI
IN
jacks.
•
rCM
When signals from the DIGITAL
INjack
are
selected,
rCM
signals are given priority (to
prevent interruption when playback starts).
However, when other signals are input, there
may be no sound,
depending
on the formal.
In this case, set this item to "AUTO."
When
signals from the
HDMI
IN
jack
are
selected, only PCM signals are output from
the connected player. When signals in any
other format are received, set this item to
"AUTO."
• AUTO
Automatically switches the input mode
between Dolby Digital, DTS, DSD
or
rCM.
Note
When
setta
"AUTO"
and the sound from the digital
audio
jacks
(for a
CD.
etc.) is interrupted when
playback starts, set to "PCM."
•
o
"1J
(1)
Q;
-
0'
j
l/I
59
GB
To Next Page
Loading...
