Tuning radio stations
1 Press TUNER repeatedly to select the
FM
or
AM
band.
You can also usc
INPUT
SELECTOR
on
the
receiver.
2 Press TUNING + or TUNING
-.
Press
TUNING
+ to scan from low to high
frequencies, press
TUNING
-to
scan from
high to low frequencies.
The
receiver
stops
scanning
whenever
a station is received.
You can also press
TUNING
MODE
onlhe
receiver to select
"AUTO,"
and then turn
TUNING
to select stations.
Selecting a frequency directly
(Direct Tuning)
1 After selecting the
FM
or AM band,
press D.TUNING.
2 Press the numeric buttons to enter the
frequencies, then press
8 to enter.
Presetting
radio
stations
1 Tune in the station that you
want to preset.
For details on
the
operation, refer to
"Tuning
radio stations."
2 Press MEMORY.
"MEMORY"
appears
on the
display
for a
fcw seconds. Perform steps 3 and 4 hcfore
the display changes.
3 Press PRESET + or PRESET -
to select a preset number.
30 FM and 30 AM preset numhers are
available. If
"MEMORY"
disappears
hefore you
sclcclthe
preset numher, start
again from step
2.
4 Press ENTER.
The
station is stored as
the
selected preset
numher. If
"MEMORY"
disappears
122
GB
hefore you select the preset number. stal1
again from step
2.
5 Repeat steps 1 to 4 to preset
another station.
Selecting a preset station
1 Press TUNER repeatedly to select the
FM
or AM band.
2 Press PRESET+ or PRESET -
repeatedly to select the preset station
you want.
You
can
also press the numeric buttons to
select
the
preset station you want.
Then,
press
ENTER
10
enler
the selection.
You
can
also press
TUNING
MODE
on the
receiver repeatedly to select
"PRESET,"
then usc
TUNING
to select the preset
stations you want.
Listening
to
satellite
tuner
For details on
XM/SIRIUS
Radio service,
refer to
"Listening
to satellite radio" (page 85)
in
'Tuner
Operations."
Checking the Satellite Tuner ID
1 Press SHIFT, then press
XM
to
select
"XM
RADIO,"
or press SIRIUS to select
"SIRIUS."
You
can
also usc
INPUT
SELECTOR
on
the receiver.
2
PressTUNING+orTUNING-toselect
channelO.
You can also press
TUNING
MODE
on
the
receiver to select
"AUTO,"
then turn
TUNING
to select
channel
O.
3 Check the
XM
ID or SIRIUS ID
on
the
display and write
it
in
the space
provided here.
XM
10:
_
SIRIUS
10:
_
To Next Page
Loading...
