Sony STR-DA5300ES - Page 131

Program the sequence of the
operation
Press MACRO 1 or MACRO 2 for
more than 1 second while
pressing
RM SET UP.
The RM SET UP button flashes.
c
!!!,
~
\Q
-
':r
CD
:D
CD
3
o
CD
..
Make a one second
interval.
When you want
to make a longer
interval, press
MACRO
lor MACRO 2
repeatedly.
Performs the operation
of the bulton.
Operations to be
programmed
MACRO lor
MACRO 2
Press
The input button selected in step 2 flashes
twice, then lights up again.
The input Switches inputs.
bulton for more
than I second
4 Repeat steps 2 and 3. When you
want to assign another
command for the same
component, repeat step 3.
5 Press RM SET UP to finish the
programming process.
Tip
If the RM SET UP bulton !lashes live limes in
slep I. and the macro programming process
does
nOl sl,u1, replace the balleries wilh new
ones.
assign one of the following
operations.
The selected input bulton lights up.
3 Press the button for the
operation you want to perform
to learn the function as follows.
3
~W-1,3
1
2,3
Tip
When you press RM SET UP, usc a thin wire.
such as a paper
dip.
2 Press the input button of the
component that you want to
To cancel programming
Press RM SET UP. Also, not pressing any
button for
60 seconds cancels the settings.
The previous command remains valid.
continued _
131
GB