Notes
o This function
does
not work
in
the following cascs.
- The multi-channel input
is
selected.
-
DTS-HD
signals with a sampling frequency
of
more than 48
kHz
are being received.
- Dolby
TrueHD
signals with a
sampling
frequency
of
more
than
96
kHz
are being
received.
oIl'
you set up the sound field effect while the
receiver
is
receiving signals with a
sampling
frequency
of
more than 48 kHz, the signals will
always be played back at
either
44.1
kHz
or
48 kHz.
oIl'
you set up the
sound
field during DTS
96/24
signal reception. the signal will be played back
only at
48 kHz.
o
The
beginning
of
the sound stream may be dropped
out when Neural-
THX
processing
is
turned on
or
off.
Tips
o
We
usually
recommend
"A.F.D. Auto." however
sometimes
it
may be better to use SB Decoding to
match the input stream to the
mode
you prefer.
o
You
can
identify the
encoding
format
of
DVD
software, etc.. by looking at the logo on the
package.
o Dolby Pro Logic IIx decoding is effective, when a
multi-channel signal
is
input.
At this time. the setup
of"SR
Decoding"
and
"SB
Dec
Mode"
in
the Surround settings
menu
becomes
invalid. When you select decoding modes other
than Dolby Pro Logic IIx, multi-channel sound
(being
encoded)
is output.
o Neural-THX is effective when multi-channel
signals arc input.
If you connect a sub woofer
This receiver will generate a low frequency
signal for output to the sub woofer when there
is no L.F.E. signal, which
is
a low-pass sound
effect output from a sub woofer to a 2 channel
signal. However, the low frequency signal is
not generated for
"Neo:6
Cinema"
or
"Neo:6
Music" when all speakers are set to "LARGE."
In
order to take full advantage
of
the Dolby
Digital bass redirection circuitry, we
recommend setting the sub woofer's cut off
frequency as high as possible.
66
GB
To Next Page
Loading...
