Input
stream
Dolhy Digital
5.1
Output
Surround
back
channels
decoding
5.I
C
)
though the packages have Dolhy Digital EX logos.
In
this case, selecl
"ON."
• When
"I'll
Ix"
of
the A.F.D. mode is selecled, the
SR Decoding
is
decoded in the
PLllx
mode.
Dolhy Digilal
6.1
C)
Surround EX
hl
DTS
5.1
5.1"'
DTS-ES Matrix
6.l
e
)
6.1"
DTS-ES
Discrele 6.1
eI)
Malrix
decoder
Ihat
confirms
10 Dolhy
Digital EX
DTS Matrix decoding
DTS Discretc
decoding
•
S8
Dec Mode
(Surround back decoding mode)
You
can select surround back decoding mode
only when "SB Decoding"
is
set to
"ON"
or
"AUTO" and the input stream contains the
Dolby Digital Surround EX nag.
Parameter Speaker
Surround
back
setting decoding
Note
Malrix decoding
conforming
to Dolhy Digital EX is
applied
if
the
speaker
selling is 6.1 channel
system
and movie decoding conforming to Pro Logic IIx
is
applied if the
speaker
selling
is
7.1
channel system,
when you select Dolby
PLllx
MS under the
following conditions:
- a Dolhy Digital Surround EX signal is input
-
"SR
Decoding"
is
set to
"AUTO"
al
A 6.1 channel decode !lag
is
informalion recorded
in software, such as DVDs.
h)
A Dolhy Digital DVD Ihat includes a Surround EX
!lag.
The
Dolhy Corporation
weh
page can help
you
distinguish Surround EX films.
,I
Software
encoded
with a flag to denote
it
has holh
DTS-ES Matrix and
5.1
channel signals.
eI'Sof!ware cncoded with hoth
5.1
channel signals
and
an extension stream designed for returning
Ihose signals 10
6.1
discrete channels. Discrete 6.1
channel signals are DVD specific signals not used
in movie thealers.
<'When two surround hack speakers are connected,
the oulput channel will he
7.1
channel signals.
•
ON
The
SB Dec Mode selling
is
applied to
5.1
channel and
6.1
channel decoding
in
the
input stream.
• OFF
Surround back decoding is not performed.
Notes
• This function does nol work
in
Ihe following cases.
- The Illulti-channel input
is
selected.
- The sound field for music
or
movies
is
selected.
·If
surround hack decoding processing
is
heing
performed while the receiver is receiving signals
wilh a sampling frequency
of
more than 48 kHz,
Ihe signals will always be played back at eilher
44.1
kHz
or
48 kHz.
• If surround back decoding processing is heing
performed while the receiver
is
receiving DTS
96/
24
signals, the signals will always he played hack
at48
kHz.
• There Illay he no
sound
from the surround hack
speaker
in
Dolhy Digital EX mode.
Some
discs
have no Dolby Digital Surround EX flag even
DDEX
PLllx MV
PUlx
MS
7.1
channels
6.1
channels
7.1
channels
6.1
channels
7.1
channels
6.1
channels
Matrix
decoder
conforms
10 Dolhy Digital EX
Matrix
decoder
conforms
to Dolhy Digital EX
Movie
decoder
conforms
to Dolhy Pro Logic IIx
Matrix
decoder
conforms
to Dolhy Digital EX
Music
decoder
conforms
to Dolby Pro Logic IIx
Music
decoder
conforms
to Dolhy Pro Logic IIx
To Next Page
Loading...
