To Next PageTo Next Page
Need help?Do you have a question about the Spinner SM100 and is the answer not in the manual?
This documentation provides essential information for safe, correct, and economical machine use.
Defines designations and symbols used for important information within the technical product documentation.
Specifies the intended use of the machine and warns against misuse and potential hazards.
Outlines the application limits based on the machine's maximum operating values.
Details conditions under which the machine should be operated, including safety equipment.
Provides organizational measures for safe operation, personnel conduct, and machine safety.
Specifies requirements for personnel operating, maintaining, and repairing the machine.
Describes general mechanical hazards associated with the machine's moving parts and sharp components.
Details specific hazards, including electrical risks and those related to oil, grease, and chemicals.
Addresses potential dangers that may arise under specific circumstances or due to inattention.
Presents the EC Declaration of Conformity for the machine, listing relevant directives and standards.
Describes the SM100 as a compact grinding machine for small cutting tools and its capabilities.
Provides detailed technical specifications including electrical, motor, spindle, and dimensional data.
Lists the basic and special equipment included with the machine, and options for extension.
Provides instructions and warnings for safely transporting the packed grinding machine.
Details how to align and install the machine, including recommendations for workbench placement.
Describes the clamping lever and its functions for securing the swivel holder and movements.
Identifies key operating elements like the grinding wheel change lever and infeed adjusting screw.
Explains the necessity and technical data of a dust extraction device for grinding operations.
Specifies the required supply voltage and describes the main connection and push buttons.
Details maintenance for the grinding spindle and flange, and greasing procedures for the swivel holder.
Explains the operation of the quick change unit, including the 'closed' and 'open' lever positions.
Provides instructions and warnings for assembling the grinding wheel, emphasizing component integrity.
Identifies the various fittings required for the assembly of the grinding wheel flange.
Details the step-by-step process for assembling the grinding wheel onto the flange, including tightening.
Specifies the bore diameter, outer diameter, and max height for grinding wheels used with the machine.
Identifies the operating elements used for dressing the grinding wheel, including the dressing diamond.
Details the procedure for dressing the grinding wheel using the infeed screw and dressing diamond.
Details the clamping lever and adjusting elements of the universal swivel holder.
Describes the two available types of dividing apparatus and their features.
Explains the clamping plate for square tools, including its components, maximum tool height, and stopper.
Details the process of grinding a radius, starting with the centering bracket and tool contact.
Details the process of halving a cutter and initiating the main cutter grinding process.
Describes the integrated coolant unit, its operation, and recommends specific coolants.
Lists and categorizes various grinding wheels available for the machine.
Lists additional accessories and extension options not included with the standard machine delivery.
Presents the electrical circuit diagram for the machine, showing components and connections.
Details the microscope unit, its components, and procedures for axial and radial adjustment.
General