Spinner SM100 - 3.1 EC Declaration of Conformity

3-2
 SPINNER Werkzeugmaschinenfabrik GmbH
SM-2-12/02
Description, Transportation, Installation instructions
3.1 EC Declaration of conformity
EC Declaration of conformity
as defined by the EC machine direction 98/37/EC
EC direction Electromagnetic compatibility 89/336/EEC
EC direction Low voltage 73/23/EEC
The machine
Description
Tool grinder
Type
SM100
Serial number
has been developed, designed and built according to the above mentioned EC directions in the own
risk of:
Company
SPINNER Werkzeugmaschinenfabrik GmbH
Rudolf-Diesel-Ring 24
D-82054 Sauerlach (bei München)
Tel.: +49 8104/803-0; Fax: +49 8104/803-19
E-Mail: sales@spinner-wzm.de; service@spinner-wzm.de
If the machine has been modified or changed by the enduser, this certificate is not valid any more.
The following harmonised standards have been used:
EN 294 EN 13218
EN 292 T1 EN 61000-6-2
EN 563 EN 61000-6-4
EN 954-1 EN 60204 T1
Sauerlach, December 2002 .......................................................................
Nicolaus Spinner, Dipl. Ing (FH)
(Authorized signatory)