2-3
SPINNER Werkzeugmaschinenfabrik GmbH
SM-2-12/02
2.3 Application limits
The application limits are determined by the maximum values of the machine, especially
those for:
• Largest radius that can be ground
• Largest adjustment of the swivel holder parallel to the grinding spindle
• Largest adjustment at the side over the cross slide
• Length of the clamping collet
These values are listed in the technical data. Familiarize yourself with this data before
using the machine to avoid severely damaging the machine.
2.4 When the machine can be used
• You are only to operate the machine when all safety equipment and safety-
related equipment, e.g. removable safety equipment or exhaust equipment, are
available and function properly!
2.5 Working safely – Organizational measures
• Do not carry out any work steps that negatively affect the safety of the machine!
• All information on hazards on the machine are to be observed!
• All safety information and information on hazards on the machine are to be
maintained in a readable format together with all related documentation!
• The personnel should not have long exposed hair or wear loose clothing or
jewelry (including rings), otherwise there is a danger of bodily harm (e.g. when
clothing gets caught or the operator is pulled into the machine)! The operator
must conform to the personal safety measures in the national regulations related
to accident prevention (hair net, protective goggles, gloves, ear plugs or related
gear, protective steel-tipped shoes, etc.)!
• Check at regular intervals to ensure that the personnel are aware of the safety
measures and dangers in accordance with the technical product documentation!
• The responsibilities for the various tasks to be carried out in conjunction with the
operation of the machine must be clearly defined and maintained so that there
are no undefined areas of responsibility when it comes to safety! When making
changes to the machine that affect its safety or changing the way you operate
the machine, switch off the machine immediately and inform the office/person
responsible!
• Original parts and accessories are specially designed for this machine. We would
especially like to call your attention to the fact that original parts and accessories
not supplied by us have also not been tested and released by us! The installation
and/or the use of such products can therefore negatively affect the structural
properties of the machine! The manufacturer is not liable for any damage that
results from the use of parts and accessories that are not original parts and
accessories!
• Observe the fire prevention regulations when handling flammable materials!
• Switch off the machine immediately and lock it when a malfunction occurs! Have
the malfunction corrected as soon as possible!
• Before switching on or engaging the machine, make sure that no one will be
placed in a hazardous situation as a result of the machine startup!
• Observe and maintain the prescribed setup, maintenance, and inspection tasks
and schedules, including those specifications regarding the exchanging of
parts/components, in the technical product documentation! These tasks may only
be carried out by trained personnel!
To Next Page
Loading...