Spinner SM100 - 16.1 Grinding Wheels

16-2
 SPINNER Werkzeugmaschinenfabrik GmbH
SM-2-12/02
Accessories
16.1 Accessories
Grinding wheels
Material
Corundum Siliconcarbide Borazon Diamond
rough
Diamond
fine
Form
Dorfnerwerk
100x50x25
Recess 84x4
Rotations
max. 6100 rpm
Speed
32 m/s
No. 10015
Dorfnerwerk
100x50x25
Recess 84x4
Rotations
max. 6100 rpm
Speed
32 m/s
No. 10016
- - -
- - -
Vollstädt Diamant
100x14x5x25
Rotations
3820-6690 rpm
Speed
20-35 m/s
No. 10019
Vollstädt Diamant
100x14x5x25
Rotations
3820-6690 rpm
Speed
20-35 m/s
Artnr.:10020
- - No. 10410
Vollstädt Diamant
100x6x3x23
Rotations
2870-6690 rpm
Speed
15-35 m/s
No.:10017
Vollstädt Diamant
100x6x3x23
Rotations
2870-6690 rpm
Speed
15-35 m/s
No.:10018
- - -
Vollstädt Diamant
100x6x5x60°x25
Rotations
3820-5730 rpm
Speed
20-30 m/s
No. 10021
Vollstädt Diamant
100x6x5x60°x25
Rotations
3820-5730 rpm
Speed
20-30 m/s
No. 10022
OTHERS
Collet type W20, 1.0< Ø<20.0mm, 0.5mm increasing Art.-No 10012+Ø
Collet type W25, 1.0< Ø <25.0mm, 0.5mm increasing Art.-No 10010+ Ø
Collet type W355E, 1.0< Ø<20.0mm, 0.5mm increasing Art.-No 10008+ Ø
Dressing diamond for ceramic wheels Art.-No 10013
Grinding wheel flange for quick change unit Art.-No 10014
WHEN YOU ARE BYING GRINDING WHEELS FROM OTHER
MANUFACTURERS MAKE SURE THAT THEY ARE MARKED
ACCORDING TO EN12413 OR EN13236! THE GRINDING
WHEELS MUST FULFILL THE ABOVE MENTIONED
CONDITIONS! THE DEMANDS IN THESE STANDARDS
CONCERNING THE SAFETY MUST BE OBSERVED!