Chapter 11: ATM Cards
ATM LEDs
SmartBits System Reference 147
Port Specifications
Table 11-3 shows the per port specifications for the SmartBit ATM Cards.
LINK Green
Off
(AT-9015, AT-9020, AT-9025, and AT-9034B)
Green – No errors detected in the physical layer.
Off – Not connected to an outside device or network.
Table 11-2. LED Functions for ATM SmartCards
LED Color/Status Description
Table 11-3.Maximum Per Port Specifications for ATM Cards
SmartSignaling
Card Description
VCCs
(PVC/SVC)
VCCs CPS Interface
CW Output
Power
AT-9015 DS1 1.544 Mbps 256 8,388,606 512 RJ-45 N/A
AT-9020 E1 2.048 Mbps 256 8,388,606 512 RJ-45 N/A
AT-9025 25 Mbps 256 8,388,606 512 RJ-45 N/A
AT-9034B E3 34 Mbps 2,048 8,388,606 800 BNC N/A
AT-9045B DS3 45 Mbps 2,048 8,388,606 800 BNC N/A
AT-9155C OC-3c/STM-1 155 Mbps 2,048 8,388,606 800 SC multimode
fiber 1300nm
min=-19dBm
max=-14dBm
AT-9155Cs OC-3c/STM-1 155 Mbps 2,048 8,388,606 800 SC multimode
fiber 1300nm
min = –15 dBm
max = –8dBm
AT-9622 OC-12c/STM-4 622
Mbps
2,048 8,388,606 800 SC multimode
fiber 1300nm
min = –19.5 dBm
typical = –17 dBm
max = –14 dBm
AT-9622s OC-12c/STM-4 622
Mbps
2,048 8,388,606 800 SC multimode
fiber 1300nm
min = –15 dBm
typical = –11 dBm
max = –8dBm
To Next Page
Loading...