SRC 3000 - Adjusting the Master Valve Power; Resetting Station Power

28
Adjusting the Master Valve Power
2. Scroll down to the ST Power command, and press ENTER.
3. Choose between Normal power, High power, Higher power and Highest power.
4. Press ENTER to confirm you selection.
6.4.2. Adjusting the Master Valve Power
To adjust the power levels for the master valve:
1. Scroll sideways to the Main menu then scroll down to the Power Levels menu, and press ENTER.
2. Scroll down to the MV Power command, and press ENTER.
3. Choose between Normal power, High power, Higher power and Highest power.
4. Press ENTER to confirm you selection.
6.4.3. Resetting Station Power
In case you want to reset the station power to the factory settings, please use the reset command.
1. Scroll sideways to the Main menu, then scroll down to the Power Levels menu, and press ENTER.
2. Scroll down to the Default reset command, and press ENTER.