Need help?Do you have a question about the SRC 3000 and is the answer not in the manual?
General| Brand | SRC |
|---|---|
| Model | 3000 |
| Category | Media Converter |
| Language | English |
Details the main board's layout, including its input and output terminals.
Covers the two-wire connection terminals and troubleshooting switches on the board.
Outlines the various procedures involved in the physical installation of the Ranger Converter 3000 system.
Guides on connecting the two-wire terminals and using the ON/OFF switches for troubleshooting.
Provides a comprehensive overview diagram illustrating all system terminal connections.
Details the two-step process for assigning unique IDs and testing each decoder.
Covers various methods for troubleshooting stations using the system's built-in tests.
Details the procedure for performing a built-in electrical test on stations and solonoids.
Describes how to use the built-in test to diagnose and locate short circuits on the two-wire path.
Guides users on executing the short finding test and interpreting the displayed results.
Details how to check power and current readings on the two-wire path to diagnose issues.
Details specific troubleshooting steps for a single station that fails to operate correctly.
Discusses methods for identifying and locating short circuits within the field wiring.
Explains how to use a clampmeter for finding shorts by measuring current flow in wires.
Details the necessary tools and methods for accurately locating shorts in the two-wire path.
Explains how to locate a specific faulty branch within the two-wire system's layout.
Details the binary search technique for pinpointing faults on a two-wire branch.
Offers a detailed guide for updating the firmware on the main Ranger Converter 3000 board.
To Next Page