9.4 Other peripheral power.........................................................24
10 Clock sources ....................................................................25
11 Boot options .....................................................................26
12 Board functions ..................................................................27
12.1 2.47” round TFT DSI display module board and DSI_V3 connector....................27
12.1.1 Display management ....................................................27
12.1.2 Touch-panel management.................................................27
12.1.3 2.47” display and DSI_V3 I/O interface .......................................28
12.1.4 Other DSI_V3 compatible peripherals ........................................28
12.2 USB Type-C
®
(High Speed, sink only) ............................................29
12.2.1 USB Type-C
®
sink only ...................................................29
12.2.2 USB 2.0 high‑speed interface ..............................................30
12.2.3 USB Type-C
®
function interface ............................................30
12.3 Hexadeca‑SPI PSRAM memory .................................................31
12.4 Octo‑SPI flash memory ........................................................32
12.5 eMMC flash memory...........................................................32
12.6 Audio codec (not used).........................................................33
12.7 20‑pin audio connector (not used)................................................33
12.8 Time‑of‑Flight sensor ..........................................................34
12.9 Temperature sensor ...........................................................35
12.10 Expansion connectors .........................................................35
12.11 User button function ...........................................................35
12.12 Reset button and reset function..................................................36
12.13 Buttons and LEDs function......................................................36
12.14 SWD debug/program/trace and JTAG/USART .....................................37
12.14.1 User constraints for CN11 or CN3 connectors..................................37
12.14.2 SWD, SWO, JTAG, and USART I/O interface ..................................38
13 Connectors.......................................................................39
13.1 USB Type-C
®
receptacle connector (CN4) ........................................39
13.2 Debug connector (CN11) .......................................................40
13.2.1 MIPI10 debug connector (default configuration) ................................40
13.2.2 STDC14 debug connector (option) ..........................................41
13.3 TAG connector (CN3) ..........................................................42
13.4 DSI_V3 display board connector (CN2) ...........................................43
13.5 Audio jack (not used) (CN6).....................................................44
13.6 STLINK-V3E USB Micro-B connector (CN5) .......................................45
UM2967
Contents
UM2967 - Rev 1
page 64/68