6. TOOL USE AND SET UP
6.1 SWITCHING FORWARD/REVERSE SWITCH NORMAL OPERATION
NB08PT-18 PB2500Smart
Switch FR lever to “Stroke mode” side.
Push the FR lever from left side to right side
from the tool front.
Push
FR lever
Not Available
6.2 POWER ON
NB08PT-18 PB2500Smart
Pull trigger and release to ON.
“Stanley Engineered Fastening” logo will appear
on the screen.
The tool returns home automatically.
After showing logo for a few seconds,
the screen is switched to counter screen
automatically.
*Power will be OFF automatically in 3 minutes
after trigger was pulled or the screen was
touched last.
11
ENGLISH
To Next Page
Loading...
Need help?
General
