NB08PT-18 PB2500Smart
After changing, touch “Key” icon to x the
setting value and lock again.
Not Available
After setting, touch “Home back” icon and
get back to counter screen.
*Please refer to Instruction Manual for
inserting a blind insert nut prior to placing.
Locked
7.3 ENFORCED SPIN OFF
NB08PT-18 PB2500Smart
When the tool cannot be being of from the
base material or the nut thread deformed
and stuck on the tool, enforced spin o can
be used.
Touch “Spin o ” icon. The tool will operate to
reverse side in constant numbers.
Not Available
FR lever also can be used to spin o .
Switch FR lever to “Enforced spin o ” side.
Push the FR lever from right side to left side
from the tool front.
The power is turned OFF automatically.
Pull the trigger, the mandrel spins in reverse
rotation during pulling trigger.
After removal, switch FR lever to stroke
mode and pull trigger to turn on the power
again.
FR lever
Push
29
ENGLISH
To Next Page
Loading...
Need help?
General
