Data and Time Stroke value Force value Accessment result
Force raw values
Not use
Stroke raw values
CAUTION: Do not copy “.cnts”, “.force”, “.passwd”, “.snum”, “.stngs”, because they are a setting les
CAUTION: Only copying is allowed. You cannot delete or write any les into the tool. If you try to delete or write, your
PC might freeze. So, do not do this.
6.16 BATTERY LEVEL AND ALARM
NB08PT-18 PB2500Smart
Battery level can be seen in the screen.
Refer to the pictures below for the guideline of
the battery level.
Battery level
Battery level
If the battery level reached lowest level, a
message “Charge Battery” is shown in the
screen.
Remove and charge the battery.
*The charge level might be di erent between
an indicator on the battery and this screen.
Use the indicator on the battery for the
reference only.
100-70% 69-50% 49-3% 2-0%
24
ENGLISH