8.4 ON/OFF AUTO RETURN MODE
If this function is turned on, even if the trigger is released, the tool continues the rivet setting cycle. And even if the trigger is
kept on pulling, it returns home automatically after riveting.
*If you often see the mandrel protruding from the nosepiece after riveting or if the tool cannot detect the rivet setting
correctly, turn o this mode.
NB08PT-18 PB2500Smart
Touch “Auto Return” from the setting menu.
Not Available
Turn ON/OFF Auto Return mode.
After setting, touch “Back” or “Back Home”
icon.
(Blue: ON Black: OFF)
If Auto Return mode is enabled, ”AR” is
displayed on the upper right on the screen.
"AR"
33
ENGLISH
To Next Page
Loading...
Need help?
General
