6.15 EXTRACTING THE DATA
NB08PT-18 PB2500Smart
The number of nuts set are
memorized each day and month
into the tool.
These can be checked by
connecting Micro USB B type into
your PC.
If Smart function is enabled, the
process curve Maximum 500,000
data are stored into the tool.
They can be extracted through
Micro USB B type into your PC with
CSV format.
Touch “USB Connect” from the setting menu.
A message “USB Connected” is displayed.
Connect the tool and your PC by a cable of
Micro USB B type.
Your PC recognizes the tool, it takes about
1minute to recognize the tool.
Micro USB
Micro USB
22
ENGLISH
To Next Page
Loading...
Need help?
General
