Battery charging. Charge only between 4°C and 40°C.
Battery charged. Discard the battery pack with due care for the
enviroment.
Hot/cold pack delay. Do not incinerate the battery pack.
Charges Li-Ion battery packs. See technical Data for charging time.
Only for indoor use. Do not charge damaged battery packs.
Charge DEWALT®/POP®Avdel® battery packs
only with designated DEWALT®/POP®Avdel®
chargers. Charging battery packs other
than the designated DEWALT®/POP®Avdel®
batteries with a DEWALT®/POP®Avdel®
charger may make them burst or lead to other
dangerous situations.
Your DEWALT® charger is duable insulated in
accordance with EN60335; therefore no earth
wire is required.
STANLEY Engineered Fastening policy is one of continuous product development and improvement and we reserve
the right to change the speci cation of any product without prior notice.
2. SPECIFICATIONS
Each section of this instruction manual has a box which highlights to which tool this instruction the following boxes are
examples, with an explanation too:
NB08PT-18
Applicable only to NB08PT-18 Tool
PB2500Smart
Applicable only to PB2500Smart Tool
NB08PT-18 PB2500Smart
Applicable to both NB08PT-18 and PB2500Smart Tools
NB08PT-18 PB2500Smart
Touch the current counter
value
Not Available
Applicable to NB08PT-18 only
7
ENGLISH
To Next Page
Loading...
Need help?
General
