Stanley NB08PT-18 - Setting Assessment Criteria(Free Setting Mode) *Smart Function on

8.3 SETTING ASSESSMENT CRITERIAFREE SETTING MODE *SMART FUNCTION ON
NB08PT-18 PB2500Smart
Open “Smart Function” menu from the
setting menu
Touch “Assessment”.
Not Available
Turn ON Free setting and Touch ”Free
setting”.
(Blue: ON, Black: OFF)
Possible to set the ranges for Stroke and
Force freely.
Touch the value you want to change and set
the value with Up-Down icons.
Note, if you set the range to too small, it has
a potential that NOK occurs frequently.
Reference measurement accuracies are as
follows.
Stroke: ±0.5mm
Force: ±500N~1,000N
After setting, touch “Back” or “Home Back”
icon.
32
ENGLISH