6.13.2 In case of MANDREL, JAWS and OVERHAUL
NB08PT-18 PB2500Smart
It counts up the counter despite the
assessment result is OK or NOK.
If the counter value reaches a setting value,
the following alarm messages are shown in
the screen.
Use these alarms as a guide to know the
timing of maintenance etc.
Touch the screen somewhere to clear the
alarm and do maintenance work accordingly.
Alarm for Overhaul
Alarm for replacing mandrel Not Available
Alarm for emptying collector Not Available
Alarm for Jaw Maintenance
Not Available
20
ENGLISH
To Next Page
Loading...
Need help?
General
