26 TS 410, TS 420
5.5 Ribbed poly V-belt
: Unscrew collar nuts (arrows).
: Relax the ribbed poly V-belt by
turning the hexagon (1) on the
tensioner counterclockwise until
the arrow points to "0" (arrow).
: Pull the hose (1) out of the guides
(arrows).
370RA010 TG370RA011 TG
1
370RA044 TG
1
: Remove the screw (arrow).
– Remove the belt guard (1).
: Take out the collar nuts (arrows).
– Remove starter cover (1).
: Take the ribbed poly V-belt (1) off
the front belt pulley (arrow).
370RA014 TG
1
370RA274 TG
1
370RA048 TG
1
: Take the ribbed poly V-belt (1) off
the belt pulley on the clutch side.
– Examine the belt and replace it if
necessary.
– First slide the ribbed poly V-
belt (1) over the belt pulley on
the clutch.
: Then fit the ribbed poly V-belt (1)
over the front belt pulley (2) and
turn the pulley (2) to draw the belt
onto the pulley.
370RA049 TG
1
370RA049 TG
1
2
To Next Page
Loading...
