5TS 410, TS 420
2. Safety precautions
Specific national safety regulations
and the safety instructions in the
instruction manual must be
observed if the machine has to be
started up during maintenance or
repair work.
Gasoline is highly inflammable and
can also be explosive under certain
conditions.
Protective gloves must be worn
when components have to be
heated for assembly/ removal
purposes.
Improper handling may result in
burns and other serious injuries.
Do not bring any fire, flame, spark or
other source of heat near the fuel.
All work with fuel must be performed
outdoors only. Spilled fuel must be
wiped away immediately.
Always test for leaks after working
on the fuel system and shortblock.
To Next Page
Loading...
