STMicroelectronics STM32F038C6 - Table 7. Stm32 F038 X6 I 2 C Implementation

Revision history STM32F038x6
100/102 DocID026079 Rev 3
24-Sep-2015
2
(continued)
Added WLCSP25 package, updates in the following:
– Table 1: Device summary
– Section 2: Description
– Table 2: STM32F038x6 family device features and
peripheral counts
– Section 4: Pinouts and pin description: addition of
Figure 6: WLCSP25 25-ball package ballout (bump
side) and update of Table 10: Pin definitions,
– Table 17: General operating conditions
– Section 7: Package information with the addition of
Section 7.4: WLCSP25 package information
– Table 65: Package thermal characteristics
16-Dec-2015 3
Cover page:
– number of timers added in the title
– “20 mA” I
2
C output drive replaced with “extra”
– number of GPIOs and 5V-tolerant GPIOs corrected
Section 2: Description:
– Figure 1: Block diagram updated
Section 3: Functional overview:
– Figure 2: Clock tree updated
– Section 3.5.3: Low-power modes - added inf. on
peripherals configurable to operate with HSI
– Section 3.10.2: Internal voltage reference (VREFINT)
- removed information on comparators
– Section 3.11.2: General-purpose timers (TIM2, 3, 14,
16, 17) - number of gen-purpose timers corrected
– Table 7: STM32F038x6 I2C implementation - added
“extra” output drive current
– Table 8: STM32F038x6 USART implementation
added
Section 4: Pinouts and pin descriptions:
– Package pinout figures updated (look and feel)
– Figure 6: WLCSP25 package pinout - now presented
in top view
– Table 11: Pin definitions - notes 3 and 6 added
Section 6: Electrical characteristics:
– Table 20: Embedded internal reference voltage:
removed -40°-to-85° condition and associated note for
V
REFINT
– Table 25 and Table 24 values rounded to 1 decimal
– Table 41: ESD absolute maximum ratings updated
– Table 44: I/O static characteristics - removed note
Table 68. Document revision history (continued)
Date Revision Changes