Stryker 3000 - Page 146

Appendix A – Assembly Drawings and Parts Lists
146
A.2 LITTER DRAWINGS (CONTINUED)
LITTER ASSEMBLY, ELECTRICAL P/N 3000–300–899 (CONTINUED)
HEAD END
Coil Cord Ground
See Detail B
DETAIL B
Power Cord Ground
p/n 3000–300–820
Translation Cable Ground
p/n 3000–300–375
p/n 3000–200–805
DETAIL C
Translation
Cable
Grounds
See Detail C
Item Part No. Part Name Qty. Item Part No. Part Name Qty.
A (page 141–144) Litter Ass’y, Mechanical 1 N 3000–300–611 CPU Fuse Label 1
B3–124 Hex Washer Hd. Screw 9 P 3000–300–115 Standoff 2
C23–25 Hex Washer Hd. Screw 1 Q 3000–300–65 Hanger Bracket, Left 15
D 3000–300–261 Thigh Support Bracket 2 R 3000–300–67 Hanger Bracket, Right 1
E 3000–300–2 Plastic Clip Nut 1 S 30–36 Split Bushing 16
F 3000–300–941 Litter CPU Assembly 1 T 30–37 Split Bushing 1
G52–89 Nylon Screw 2 U 3000–300–848 Litter Ground Jumper 1
H 3000–300–30 Cable Shield Assembly 1 V 3000–300–612 Power Junct. Fuse Label 1
J13–18 Ext. Tooth Lock Washer 1 W 3–132 Hex Washer Hd. Screw 11
K (page 168) Translation Cable Ass’y1 X6–74 Flange Nut 3
L 3000–300–28 Cable Routing Bracket 1 Y 30–27 Strain Relef 1
M 3000–300–58 Plunger Switch 4 Z 3000–300–820 Power Cord 1