www.stryker.com 6390-009-002 REV D 7
Summary of safety precautions
CAUTION (CONTINUED)
• The emissions characteristics of this equipment make it suitable for use in industrial areas and hospitals (CISPR 11
class A). This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area (for which CISPR 11 class B is normally required) is likely to cause harmful
interference, in which case the user will be required to correct the interference at their expense. In the event of
interference, please relocate or reorient the Power-LOAD system or interfering product.
• Do not spray directly underneath the trolley up in to the trolley mechanism. Water could gain ingress into the trolley
housing and may accelerate corrosion or degrade operation.
• Do not clean, service, or perform maintenance while the product is in use.
• The manual overrides allow the Power-LOAD system to move freely.
• When replacing the battery, do not touch the negative and positive battery terminals together on any metal surface.
Pinch points
Figure 1: Pinch points
To Next Page
Loading...
Need help?
General
