8 6390-009-002 REV D www.stryker.com
Introduction
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating
or maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or
maintenance of this product.
CAUTION
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in
this manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable
operation resulting in injury to patient or operator. Modifying the product also voids its warranty.
Notes
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current
product information available at the time of printing. There may be minor discrepancies between your product and
this manual. If you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.
Product description
The Stryker Model 6390 Power-LOAD® power-loading cot fastener system is designed to lift, lower, or steer compatible
ambulance cots into and out of an emergency ground transport vehicle. When the cot is securely attached to the system,
a battery powered hydraulic system assists the operators in loading and unloading a cot. The system also secures the
compatible ambulance cot within the vehicle for patient transportation purposes. When the cot is secured in the
transport position, Power-LOAD inductively charges compatible model 6506 Power-PRO™ XT and 6516 Power-PRO™
IT ambulance cots. In the event of power loss, the system remains functional for securing the cot within the vehicle.
Indications for use
Power-LOAD is intended to assist with loading and unloading of a compatible wheeled stretcher (ambulance cot) to and
from a transport vehicle and to secure the ambulance cot during transport. The device has a maximum safe working
load of 870 lb (395 kg), which includes the weight of the ambulance cot, patient, and equipment attached to the cot
(such as oxygen bottles, monitors, and pumps). The intended users of the device are trained professionals, including
emergency medical service and medical care center personnel, as well as medical first responders, service technicians
and installers.
Expected service life
Power-LOAD has a seven year expected service life under normal use conditions and with appropriate periodic
maintenance.
Contraindications
None known.
To Next Page
Loading...
Need help?
General
