Stryker Prime Series User Manual

• Always remove any devices that may be in the way before you raise or lower the litter.
• Do not sit on the end of the product. The product may tip.
CCAAUUTTIIOONN -- Do not use the hydraulics on the base to raise the product with a patient lift under the product.
For product feature availability for your model, see
Product features (page 19).
For products with an electric lift, press down on the pump pedal (A) until you achieve the desired height (
Base controls
(page 20)).
For products with a non-electric lift, pump the pump pedal (A) until you achieve the desired height.
LLoowweerriinngg tthhee pprroodduucctt
WWAARRNNIINNGG
• Always position the patient in the center of the product.
• Always lock the siderails in the highest height position and lower the product to the lowest height position when you
leave a patient unattended.
• Always remove any devices that may be in the way before you raise or lower the litter.
• Do not sit on the end of the product. The product may tip.
CCAAUUTTIIOONN -- Do not use the hydraulics on the base to raise the product with a patient lift under the product.
For product feature availability for your model, see
Product features (page 19).
To lower the entire product, press down on the center of the uni-lower pedal (C) (
Base controls (page 20)).
To lower the head end, press down on the pedal (B) or on the side of the uni-lower pedal (C) closest to the head end of the
product.
To lower the foot end, press down on the pedal (D) or press down on the side of the uni-lower pedal (C) closest to the foot
end of the product.
PPoossiittiioonniinngg tthhee pprroodduucctt iinn TTrreennddeelleennbbuurrgg
WWAARRNNIINNGG -- Always remove any devices that may be in the way before you raise or lower the litter.
CCAAUUTTIIOONN -- Do not use the hydraulics on the base to raise the product with a patient lift under the product.
To position the product in the Trendelenburg position (head down), raise the product to the highest height position. See
Raising the product (page 20).
NNoottee -- Raise the product to the highest height position for a greater Trendelenburg angle.
To lower the head end of the product, push down on the head end or foot end release pedal (D) or push down on the side of
the uni-lower pedal (C) closest to the head end (
Base controls (page 20)).
To lower the product from Trendelenburg position, push down on the head end and foot end release pedals (B and D) at the
same time or push down on the center of the uni-lower pedal (C) until the litter is flat.
PPoossiittiioonniinngg tthhee pprroodduucctt iinn rreevveerrssee TTrreennddeelleennbbuurrgg
WWAARRNNIINNGG -- Always remove any devices that may be in the way before you raise or lower the litter.
1115-309-001 Rev AD.0 21 EN

Stryker Prime Series Specifications

General

Model	Prime Series
Category	Medical Equipment
Power Requirements	120V AC, 60Hz
Battery Backup	Yes
Type	Medical Bed
Weight Capacity	500 lbs
Features	integrated scale
Compatibility	Compatible with Stryker