Stryker Prime Series User Manual

A
E
C
B
D
FFiigguurree 2299 –– PPoossiittiioonniinngg tthhee tthhrreeee--ssttaaggee ppeerrmmaanneennttllyy aattttaacchheedd IIVV ppoollee
AAttttaacchhiinngg aanndd ppoossiittiioonniinngg tthhee rreemmoovvaabbllee IIVV ppoollee
CCAAUUTTIIOONN
• Do not use the IV pole as a push/pull device. Product damage may occur.
• Do not hang IV bags that exceed 40 lb (18 kg) on the IV pole.
• Always make sure that the IV pole is at a low height to pass through door openings when you transport a patient.
To attach and position the removable IV pole (Figure 30):
1. Insert the IV pole into a socket at the head end or foot end of the product.
2. Turn the knob (A) counterclockwise and pull up on the telescoping portion (B) until you reach the desired height.
3. Turn the knob (A) clockwise to lock the telescoping portion in place.
EN 48 1115-309-001 Rev AD.0

Stryker Prime Series Specifications

General

Model	Prime Series
Category	Medical Equipment
Power Requirements	120V AC, 60Hz
Battery Backup	Yes
Type	Medical Bed
Weight Capacity	500 lbs
Features	integrated scale
Compatibility	Compatible with Stryker