Stryker Prime Series User Manual

2. Release ZZeerroo and llbb//kkgg.
NNoottee -- The volume levels LL ((11--44)) display on the screen.
3. Press ZZeerroo or llbb//kkgg to scroll through the volume levels.
NNoottee -- A brief sample of the volume plays as you scroll through the volume options.
4. Press and hold ZZeerroo and llbb//kkgg for six seconds until SSEEtt displays on the screen to save your selected volume setting.
5. Release ZZeerroo and llbb//kkgg.
NNoottee -- The volume option you selected displays on the screen. A brief sample of the bed exit alarm confirms your
volume setting.
CChhaannggiinngg tthhee bbeedd eexxiitt aallaarrmm vvoolluummee,, PPrriimmee CCoonnnneecctt
For product feature availability for your model, see Product features (page 19).
To change the bed exit alarm volume:
1. Enter the alarm volume screen.
a. For PPrriimmee CCoonnnneecctt with scale, press and hold llbb//kkgg and ZZeerroo for at least six seconds.
b. For PPrriimmee CCoonnnneecctt without scale, press and hold the bboottttoomm lleefftt and bboottttoomm rriigghhtt buttons (K and L) for at least six
seconds (
Operator keypad icon/button identification (page 33)).
2. Release the buttons when the loading bar displays on the screen.
NNoottee -- The volume options ((11--44)) display on the screen.
3. Scroll through the volume options.
a. For PPrriimmee CCoonnnneecctt with scale, press the AArrmm//DDiissaarrmm or WWeeiigghh button (A or C) to scroll through the volume
options.
b. For PPrriimmee CCoonnnneecctt without scale, press the AArrmm//DDiissaarrmm or PPaattiieenntt rreesseett button (A or J) to scroll through the
volume options.
NNoottee -- A brief sample of the volume plays as you scroll through the volume options.
4. Select the volume option.
a. For PPrriimmee CCoonnnneecctt with scale, press llbb//kkgg to select the volume option.
b. For PPrriimmee CCoonnnneecctt without scale, press the bboottttoomm lleefftt button (K) to select the volume option.
NNoottee -- SSeett displays on the screen. A brief sample of the bed exit alarm confirms your volume setting.
CChhaarrggiinngg tthhee bbaatttteerryy ppaacckk
For product feature availability for your model, see Product features (page 19).
PPrriimmee CCoonnnneecctt models require one 10.8V Li-ION battery pack (0058-134-000).
PPrriimmee electric models with a scale system require one 10.8V Li-ION battery pack, without bed exit (0058-135-000) or with
bed exit (0058-134-000).
Charge the battery pack when the battery charge indicator displays one unit remains. This prevents the scale system from
shutting down due to drained batteries.
To charge the scale system Li-ION battery pack, always plug the power cord into a grounded, hospital grade wall outlet.
The battery pack fully charges in approximately three hours.
NNoottee -- Always charge the battery pack when not in use. This helps the battery to maintain a sufficient charge and
maximizes product performance while on battery power.
EN 38 1115-309-001 Rev AD.0

Stryker Prime Series Specifications

General

Model	Prime Series
Category	Medical Equipment
Power Requirements	120V AC, 60Hz
Battery Backup	Yes
Type	Medical Bed
Weight Capacity	500 lbs
Features	integrated scale
Compatibility	Compatible with Stryker