Stryker Prime Series User Manual

CCAAUUTTIIOONN
• Do not exceed the 200 lb (90.7 kg) weight capacity of the Gatch.
• Do not sit or stand on the Gatch.
• Always use caution when you attempt to lower the Gatch while the product is unpowered. Gravity may cause a rapid
drop of the Gatch.
NNoottee
• Always plug the power cord into a grounded, hospital grade wall outlet.
• Healthcare professionals must instruct patients how to operate the patient controls.
For product feature availability for your model, see
Product features (page 19).
To raise the Gatch:
1. Press and hold the GGaattcchh uupp button (C) on the siderail patient control panel (
Positioning the product with the siderail
patient control panel, electric litter
(page 26)) or the operator control panel ( Operator control panel, electric litter (page
26)).
2. Release the button when the Gatch reaches the desired angle.
To lower the Gatch:
1. Press and hold the GGaattcchh ddoowwnn button (D) on the siderail patient control panel (
Positioning the product with the siderail
patient control panel, electric litter
(page 26)) or the operator control panel ( Operator control panel, electric litter (page
26)).
2. Release the button when the Gatch reaches the desired angle.
PPoossiittiioonniinngg tthhee rreeccoovveerryy cchhaaiirr
WWAARRNNIINNGG -- Always operate the product when all operators are clear of the mechanisms.
NNoottee -- To place the product in the recovery chair position, the product must have the LLiifftt AAssssiisstt Fowler backrest and Gatch
options.
For product feature availability for your model, see
Product features (page 19).
EN 30 1115-309-001 Rev AD.0

Stryker Prime Series Specifications

General

Model	Prime Series
Category	Medical Equipment
Power Requirements	120V AC, 60Hz
Battery Backup	Yes
Type	Medical Bed
Weight Capacity	500 lbs
Features	integrated scale
Compatibility	Compatible with Stryker