PPrreevveennttiivvee mmaaiinntteennaannccee
Remove the product from service before you perform the preventive maintenance inspection. Check all items listed during
annual preventive maintenance for all Stryker Medical products. You may need to perform preventive maintenance checks
more often based on your level of product usage. Service only by qualified personnel.
For product feature availability for your model, see
Product features
(page 19).
NNoottee -- Clean and disinfect the exterior of the mattress before inspection, if applicable.
Inspect the following items:
All fasteners are secure
Siderails move and latch
Casters lock with brake pedal applied
Casters are secure and swivel
Casters are free of wax and debris
Brake mechanism works
Steer function works
Check skins for cracks
Fowler raises, lowers, and latches in place
Gatch option raises, lowers, and secures in place
Trendelenburg/reverse Trendelenburg operates from all locations
Ground chain intact
No leaks at hydraulic connections
Hydraulic jacks hold
Lubricate where required
Body restraints option latch and are secure
IV pole option is intact, adjusts, and latches in all positions
Oxygen bottle holder option is intact and opens and closes
No rips or cracks in the mattress cover
Accessories and mounting hardware are in good condition
Battery backup works and powers features
Cables are not worn or pinched
Power cord option and plug are free of damage
All electrical connection options are tight
All grounds options secure to the frame
Ground impedance not more than 200 mΩ (milliohms), option
Current leakage not more than 300 µA (microamps) (per UL 60606-1-1), option
Batteries backup option charges
Display housing option is intact and not damaged
Load cell option is intact and not damaged
For foot support option, knee knob mechanism functions and you can secure in place
For foot support option, leg knob mechanism functions and you can secure in place
For foot support option, extends to the full extended position and stops in the correct position
EN 60 1115-309-001 Rev AD.0